Find Goldshell Tutorial

How to use [Find my miner]

1. Get the IP of the miner and access the miner’s dashboard

Visit in the browser. Google chrome is recommended.
Click the corresponding icon in the setting column to enter the device dashboard.

2. Language Switch

You can switch languages, click on the small flag icon at the top right of the page to switch languages.

3. Unlock miner and change password

Click the [unlock] button in the upper right corner of the page and input the password to unlock. The factory password of the miner is ‘123456789’.

To protect your property, please change the miner password after the first boot.
Visit the [System] page, input the current password and new password as shown below, and click the [Change] button.

4. Pool setting

  • Unlock your miner.
  • Visit the [Miner] page and [Pool Setting], find the [Add] and click
  • Enter the pool address and port number according to your choice, and set the miner name and password. The example pool in the figure above is the Dxpool.
  • Wait for the pool connect successfully, Visit the [Home] page and observe the chart. If you find a hashrate curve, the pool configuration is successful.
  • Remove pool

Select the pool to be removed in the [Pool Settings] column on the [Miner] page and click the [Remove] button.

5. Firmware Upgrade

Visit the [System] page, select and upload the new firmware file into the upgrade firmware path, click the [Update] button, and the miner will start the firmware upgrade automatically.

After the upgrade is completed, pool and network settings will remain.

*Note: Please obtain the correct firmware from official sources:

The firmware upgrade will last for 5 minutes. During this period, ensure the network is connected and do not power off.